Filter
Top Products
27
Changing the Set-up of Your WLAN
Rebooting Your Wireless AP
You must reboot your Wireless AP to apply any changes you’ve
made and saved in the Wireless Access Point Utility.
Note: Rebooting happens within seconds and does not cause
your computer to reboot.
To reboot your Wireless AP:
1 Save any setting changes you’ve made.
2 Click the Administration tab.
3 Click Reboot.
The updated settings are applied.
Adjusting the Threshold Control Settings
Changes to the Transmit Threshold Control settings
(Fragmentation threshold and RTS threshold settings) on the
Advanced page can affect overall network performance. Adaptec
highly recommends that these settings be left at their default values.