ADC 420F Network Card User Manual


 
Accessing the Modem Web Pages
34 Megabit Modem 410F and 420F User Manual
ACCESSING THE MODEM WEB PAGES
Type http://192.168.0.1 in the Location Bar field of the Web browser (as shown below), then press
. 192.168.0.1 is the default IP address for the modem 10/100BASE-T LAN port and is
a private address specified for use by RFC 1918. If you changed the LAN IP address through
the RS-232 management port (page 24), enter the new IP address in the
Location Bar instead of
192.168.0.1.
If the Megabit Modem 410F and 420F have routing or bridging/routing mode enabled, you
can also access the Web pages through the WAN IP address of the modem. You can set up the
WAN IP address through the RS-232 management port (page 24). Enter the WAN IP address
in the
Location Bar.
The Megabit Modem 410F and 420F Web pages display with two primary frames:
Frame A contains the navigation menus. Use the menus to select the configuration or
management page you want to view in Frame B.
Frame B displays the configuration or management page associated with the menu item you
selected from the navigation menu in Frame A.
ENTER
Location Bar
http://192.168.0.1
Frame BFrame A