Filter
Top Products
Chapter 4: Setting Up for Configuration
Megabit Modem 410F and 420F User Manual 37
Saving the Configuration to NVRAM
After clicking Submit to write configuration parameters to RAM, update your configuration by
writing the parameters to NVRAM. See page 36 for a list of changes you must save to NVRAM
and reset the modem to effect.
1 Click
System on the Main Menu to access the System Menu.
2 Click
Update Configuration on the System Menu.
3 Do one of the following:
• Click
Proceed to save to NVRAM.
• Click
Cancel. The configuration parameters are not written to NVRAM.
4 Reset the modem to effect the configuration using the procedure on page 38.