Filter
Top Products
Chapter 6: Configuring the Ports
Megabit Modem 410F and 420F User Manual 51
Defining Static Route Entries
You can enter up to 32 static routing IP addresses that the modem recognizes in the routing
address tables, in addition to the routing IP addresses that the modem learns.
(See “Routing” on
page 71 for more information on defining static route entries
.)
1 Enter static routes.
2 Click
Add to accept this entry.
3 To delete a
Static Route Entry:
a Click the entry in the list shown in field
above to select it. The entry displays in the
Static Route Entry fields and .
b Click
Delete to remove the entry.
4 Click Done when you complete all configuration additions and deletions.
Enter the Destination IP address and net mask destination.
Enter the Gateway IP address to the next hop.
All static route entries are listed in this table after you enter the parameters in
fields
and .
192.168.30.0 255.255.255.0
192.168.10.2