ADS Technologies SBG1000 Network Router User Manual


 
108 SBG1000 User Guide
Home
X
ExitPrint
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Setting Up a USB Driver
The following subsections describe setting up a USB driver if you connect a PC to the USB port on the SBG1000.
Perform one of the following procedures based on your Windows version:
Setting Up a USB Driver in Windows 98
Setting Up a USB Driver in Windows 2000
Setting Up a USB Driver in Windows Me
Setting Up a USB Driver in Windows XP
The SBG1000 USB driver does not support Macintosh or UNIX computers. For those systems, you can connect
through Ethernet only.
If you have a problem setting up the USB driver, remove it by performing one of the following procedures:
Removing the USB Driver from Windows 98 or Windows Me
Removing the USB Driver from Windows 2000
Removing the USB Driver from Windows XP
Caution!
Be sure the SBG1000 Installation CD-ROM is inserted in the CD-ROM drive before you plug in the
USB cable.