Filter
Top Products
34 SBG1000 User Guide
Home
X
ExitPrint
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Changing the Default Password
To change the default password:
1 On the SBG1000 Setup Program screen, click Admin to display the ADMIN — basic page:
2 In the Old Password field, type the old password. The default password is “motorola” (this field is case
sensitive).
3 In the New Password field, type the new password.
4 In the Verify Password field, type the new password again.
5 Click Apply to apply your changes.
Caution!
To prevent unauthorized configuration, change the default password immediately when you first
configure the Motorola SURFboard Wireless Cable Modem Gateway.