ADS Technologies SBG1000 Network Router User Manual


 
9 SBG1000 User Guide
Home
X
ExitPrint
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Rear Panel
The rear panel provides cabling connectors, status lights, and the power receptacle:
Key Item Description
1 The printer port provides a connection for one printer.
2 The SBG1000 includes two antennas. The optional Motorola External Diversity Antenna described in
Optional Accessories” provides higher gain to increase wireless LAN performance and coverage.
3 Use the HPNA ports to connect an HPNA LAN:
Connect the bottom HPNA port to the telephone jack using telephone wire terminated with RJ-11
connectors.
You can connect a telephone to the top HPNA port.
4 Use Ethernet ports 1 to 5 to connect an Ethernet LAN cable with RJ-45 connectors. You can connect
Ethernet-equipped computers, hubs, bridges, or switches.
5 For Windows only, use the USB port for Connecting a PC to the USB Port. You cannot connect the
SBG1000 USB port to a Macintosh or UNIX computer.
6
If you experience a problem, you can push this recessed button to restart the SBG1000 (see
Troubleshooting”). To reset all values to their defaults, hold down the button for more than five
seconds. Resetting may take 5 to 30 minutes because the SBG1000 must find and lock on the
appropriate communications channels.
7 The cable port provides a connection to the coaxial cable outlet.
8 The power connector to the AC power outlet.
1 3 46 85 72 2
5
1