Filter
Top Products
Chapter 2. Installation
24 NxT1 HSSI/V.35 User Manual 61200771L1-1
INSTALLING THE NXT1 HSSI/V.35 MODULE
Figure 2-1 represents the actions required to properly install the
NxT1 HSSI/V.35 Module, as described in the Step/Action table below.
Figure 2-1. Installing the NxT1 HSSI/V.35 Module
T
1-1
T
1-3
T
1
-2
T
1
-4
H
SS
I/V
.35
N
xT
1 H
SS
I/V.35
A
TL
A
S
800 SE
R
IE
S
Instructions for Installing the NxT1 HSSI/V.35 Module
Step Action
1
Remove the cover plate from the appropriate option slot in the
ATLAS 800 Series chassis rear panel.
2
Slide the NxT1 HSSI/V.35 Module into the option slot until the
module is firmly positioned against the front of the chassis.
3 Secure the thumbscrews at both edges of the module.
4 Connect the cables to the associated device(s).
5
Complete installation of remaining modules and Base Unit as
specified in the Installation chapter of the ATLAS 800 Series
User Manual.
To ensure that the thumbscrews are securely fastened, use a screwdriver to tighten them.