Filter
Top Products
61200771L1-1 NxT1 HSSI/V.35 Module User Manual 27
Chapter 3
Operation
OVERVIEW
You can control and configure the NxT1 HSSI/V.35 Module from a variety
of sources, including the following:
• The ATLAS 800 Series front panel, providing minimal configuration
and status support
• The terminal menus, allowing detailed configuration, status, and diag-
nostics
• SNMP, primarily for reporting alarm conditions and system status
The remainder of this section describes the menu items presented when man-
aging the NxT1 HSSI/V.35 Module via the terminal menu.
Access the terminal menu using either a VT-100 terminal attached to the
ATLAS 800 Series Base Unit’s control port or a Telnet session established
through the Base Unit’s Ethernet port. The ATLAS 800 Series User Manual
provides detailed instructions on the operation of each of these management
approaches.
TERMINAL MENU STRUCTURE
ATLAS 800 Series uses a hierarchical menu structure to provide access to
all of its features. The top-most menu level leads to submenus which are
grouped by functionality. All menu items display in the terminal window. To
access the NxT1 HSSI/V.35 Module, activate the
M
ODULES
menu. The fol-
lowing sections describe the menu items for the
M
ODULES
menu.
To edit items in the terminal menu, you must have the appropriate password level. Each menu
description in this section indicates the password level required for write and read access. See
“Access Passwords” in the appropriate ATLAS 800 Series User Manual for detailed
information on working with passwords. Security level 0 users can view and edit every available
field. Security level 5 users can view any field but cannot edit.
Refer to the appropriate ATLAS 800 Series User Manual for detailed instructions on
navigating through the terminal menu.