Filter
Top Products
TRACER 2 x E1 User’s Manual
61280004L2-1C
Section 3 Operation
27
Main Menu Screen
Pressing “M” on any screen will take the user to the Main Menu (see Figure 3-2), from which the
subsequent screens can be accessed.
To make changes to any of the items in the System Configuration Menu (Figure 3-3), use the keyboard
Arrow keys to highlight desired option and make change.
Set Tx Power allows the transmitter power to be adjusted.
Set Chipping Code allows the chipping code to be selected. Each end of the link must be configured for
the same chipping code.
Site ID allows a string of up to 32 characters to be entered as a site identifier.
Enable/Disable Password allows password protection to be enabled or disabled. The default setting is
Disabled.
Change Password allows the password to be set.
Performance Stats resets all the error counters.
TRACER MAIN MENU
ELAPSED TIME: 00000 DAYS, 00:00:07
===============================================================================
0) TRACER STATUS PAGE
1) TRACER SYSTEM CONFIGURATION MENU
2) TRACER LINK PERFORMANCE HISTORY
3) E1A STATUS/CONFIGURATION/LOOPBACK MENU
4) E1A PERFORMANCE HISTORY
5) E1B STATUS/CONFIGURATION/LOOPBACK MENU
6) E1B PERFORMANCE HISTORY
===============================================================================
PRESS MENU NUMBER, OR [ARROW KEYS] - MOVE UP AND DOWN, [SPACE] - SELECT:
Figure 3-2. Main Menu Screen
TRACER SYSTEM CONFIGURATION
ELAPSED TIME: 00000 DAYS, 00:00:07
===============================================================================
LOCAL TRACER REMOTE TRACER
------------- -------------
MIN NOM MIN NOM
RX POWER: [###################_] [###################_]
MIN MAX MIN MAX
TX POWER: [####################] [####################]
CHIPPING CODE: 0 0
SITE NAME: ADTRAN LOCAL ADTRAN REMOTE
MODEM CONTROL: ON OFF
PASSWORD ENABLE: NO NO
PASSWORD: ******* *******
FRONT PANEL LOCK: ON OFF
PERFORMANCE STATS:CLEAR CLEAR
(*) —INDICATES THAT SETTING DIFFERS FROM THE FRONT PANEL
===============================================================================
PRESS ‘M’ - MAIN MENU, ‘U’,’D’ - MOVE UP AND DOWN, [SPACE] - SELECT:
Figure 3-3. System Configuration Menu Screen