Filter
Top Products
TRACER 2 x E1 User’s Manual
61280004L2-1C
Radio Frequency Interference Statement
ii
• The installed antenna must not be located in a manner that allows exposure of the general
population to the direct beam path of the antenna at a distance less than 15 feet (4.6 meters).
Installation on towers, masts, or rooftops not accessible to the general population is recommended;
or
• Mount the antenna in a manner that prevents any personnel from entering the area within 15 feet
(4.6 meters) from the front of the antenna.
• It is recommended that the installer place radio frequency hazard warnings signs on the barrier that
prevents access to the antenna.
• Prior to installing the antenna to the RFC output, make sure the power is adjusted to the settings
specified in section 2 of this manual.
• During antenna installation, be sure that power to the TRACER equipment is turned off in order to
prevent any energy presence on the coaxial connector.
• During installation and alignment of the antenna, do not stand in front of the antenna assembly.
• During installation and alignment of the antenna, do not handle or touch the front of the antenna.
These simple precautions must be taken to prevent general population and installation personnel from
exposure to RF energy in excess of specified MPE levels.