Filter
Top Products
17 PWS-8033M User Manual
Chapter 3 Using the Hardware
3.3 Inserting a CF Card
The PWS-8033M accommodates a CF card. You can to the functionality of the PWS-
8033M by installing a CF memory card
Perform the following steps to insert a CF card into the PWS-8033M:
1. Unscrew the two hand screws securing the CF cover.
2. Insert the CF card into the slot as shown, until the contacts are properly seated
in the CF connector.
3. Replace the cover.
3.4 Removing a CF Card
1. Press the black CF button next to the slot. The button pops out.
2. Press the button again to push the CF card out.
3.5 Inserting an Micro SD Memory Card
The PWS-8033M has a SD card slot compatible with a wide range of Micro SD cards,
which are primarily used to back up or transfer files and data. The slot also supports
HCSD cards.To insert a Micro SD card into the Micro SD slot.
1. Open the right centre door.
2. Insert the Micro SD card with the notched corner as oriented as shown below
3. Press the card into the slot. The card is secure when it is flush with the slot.
4. Close and lock the door.