Filter
Top Products
35 PWS-8033M User Manual
Chapter 5 Advanced Settings
5.2.2 Adjusting Backlight Settings
The power consumption of the LCD backlight may be high, turn off the backlight
function if it is not necessary. If a backlight is required, set “automatically turn off the
backlight” function.
To change backlight settings:
1. Tap Start Settings Control Panel.
2. Tap OEMs Utility.
3. Select Display Manager, and tap the arrow next to Dark or drag the slider to the
left to reduce the screen brightness.
5.3 Performing a System Reset
You may need to perform a reset if the device freezes (i.e., device no longer
responds to the buttons on the screen). A reset allows your device to get a fresh
start, similar to rebooting a computer. This will restart your device and adjust memory
allocation. All records and entries are retained after a reset. Unsaved data in open
programs may in some cases be lost.
Performing a Software reset (re-boot)
1. Remove the stylus from its holder.
2. Lightly press the tip of the stylus to the reset button located on the PWS-8033M.