AEG 6000 Power Supply User Manual


 
5
liability for consequential damage. AEG reserves the right to
rescind all obligations such as warranty agreements, service
contracts, etc. entered into by AEG and its representatives
without prior notification in the event of maintenance and
repair work being carried out with anything other than original
AEG spare parts or spare parts purchased by AEG.
Handling
PROTECT C. is designed and constructed so that all
necessary steps for start-up and operation can be performed
without any internal manipulation of the unit. Maintenance and
repair work may only be performed by trained and qualified
personnel.
Illustrations are provided to clarify and facilitate certain steps.
If danger to personnel and the unit cannot be ruled out in the
case of certain work, it is highlighted accordingly by
pictograms explained in chapter 3.
Hotline
If you still have questions after having read these operating
instructions, please contact your dealer or our "Hotline":
Tel.: ++49 (0)180 5 234 787
Fax: ++49 (0)180 5 234 789
Internet: www.aegpss.de
Copyright
No part of these operating instructions may be transmitted,
reproduced and/or copied by any electronic or mechanical
means without the express prior written permission of AEG.
© Copyright AEG 2007. All rights reserved.