Filter
Top Products
Manual
Page 19 / 33- Revision 01
ARE I2 / RS 232 – Installation Guide
AEG
Identifikationssysteme GmbH
Söflinger Straße 100
D-89077 Ulm
Tel. ++49(0)731-933-1340/1877
Fax ++49(0)731-933-1855
e-mail: info@AEGID.de
6.6 EC- Echo
The command EC changes of the echo function setting.
Input format: EC <SP> parameter <CR>
Parameter:
v Function
0 echo on
1 echo off
Output (example): 0 <CR>
Note: The default value of the parameter EC depends on the particular
reader.
6.7 BD- Baudrate
The command BD enables the change of the baud rate. The settings are effective after a warm
start using the RST command.
Input format: BD <SP> parameter <CR>
Parameter:
Parame-
ter
Function
0 4800 baud
1 9600 baud
2 19200 baud
Output (example): 2 <CR>