Filter
Top Products
29
8. Interfaces
8.1 System interface
The bus module is connected with the relevant system interfaces of the power controllers via X1 to X8
(four-wire, 2x2 twisted, shared shielding).
The transmission rate is 38,400 Bd.
The asynchronous characters are transferred with 8bit, no parity, one stop bit. The protocol begins with
STX, followed by an identifier, the data, and is concluded with a check sum. Defective protocols are
ignored.
8.2 Ethernet interfaces
Communication medium CAT 5e
Network topology tree, star and line
Maximum cable length 100m
ProfiNET-participants restricted to the maximum supported number of devices by the con-
troller used
PNO identification number0x0188
Device ID 0x0001
Transmission rate 100 Mbit/s