Filter
Top Products
12
System upgrades
Upgrades available for existing Agilent 8510 systems to
8510XF single-sweep systems
Upgrades for 85107B and 85109C
Upgrade consists of two test heads, a millimeter
test set controller, an 83621B for LO source, and
rack. It does not include calibration kits or test
port cables.
• E7345A upgrade to an 8510XF 85 GHz system
• E7355A upgrade to an 8510XF 110 GHz system
The following options are available for both
upgrades:
• E73x5A-STD Standard configuration
• E73x5A-005 Add 45 MHz to 2 GHz low frequency
extension
• E73x5A-006 Add RF pass thru (provides coupled
output of 50 GHz source for additional test sets.
Additional test set(s) must have option 001
installed.)
• E73x5A-056 Add both low frequency extension
and RF pass thru
Upgrades for 85106C, 85106C with Option 002 (replaced
8350B/83540A with 83621A/B) 85106D
Upgrade consists of two test heads, a millimeter
test set controller, and an 83651B for RF source. It
does not include calibration kits, test port cables,
or rack.
• E7346A upgrade to an 8510XF 85 GHz system
• E7356A upgrade to an 8510XF 110 GHz system
The following options are available for both
upgrades:
• E73x6A-STD Standard configuration
• E73x6A-005 Add 45 MHz to 2 GHz low frequency
extension
• E73x6A-006 Add RF pass thru (provides coupled
output of 50 GHz source for additional test sets.
Additional test set(s) must have option 001
installed.)
• E73x6A-056 Add both low frequency extension
and RF pass thru
8510C
Millimeter
subsystem
83651B
83621B
Upgrades
from ...
85107B
85109C
85106C
85106C w/ Opt.002
85106D
85106C w/ Opt.001 & 002
85106D w/ Opt.001
85109C w/ Opt.002
... to 85 GHz E7345A
E7346A
E7347A
... to 110 GHz E7355A
E7356A
E7357A
Customer
owned
equipment