Filter
Top Products
7
Common options for RF sources
Option Description
908 Add rack flange kit
910 Extra operating and service manual
913 Add rack flange and handles kit
Extended service options are available.
Note: Although general purpose (GP) 8360 series
synthesized sweepers (836x0B) can be used in
place of the 8510-dedicated 8360 series synthe-
sized sweepers (836x1B, as listed above), the fol-
lowing options are typically recommended: Option
004 (rear panel connectors) and Option 008 (1-Hz
frequency resolution). These options come as
standard in the 8510-dedicated 8360 series
synthesized sweepers.
Measurement accessories
There are measurement accessories for seven
device connector types: 7 mm, 3.5 mm, 2.92 mm,
2.4 mm, 1.85 mm, 1.0 mm, and Type-N. Calibration
kits include standards that are required for vector
error correction. Verification kits include stan-
dards used to verify system performance specifica-
tions. Test port return cables extend the ports of
the test set and connect to the device under test.
Agilent 85130X adapter sets convert test set ports
to the same connector type (acting as a test port
saver) or to a different connector type.