Filter
Top Products
Copyright 2002 Agilent Technologies. 10001810-E6701A Tutorial LAN Connection
All Rights Reserved.
Page 12 of 32 Rev. 1.2; Feb. 14, 2002
17. If you made changes, a System Settings Change box will appear. Select the Yes box to
Restart your PC.
Windows 2000 and DHCP Address
1. Turn on your PC
2. Log in to your Network with your normal Password.
3. Log in to Windows if needed.
4. Wait until the initial Windows “wallpaper” and icons appear.
5. Turn off any running applications.
Set up Network
1. Go to the Control Panel
2. Choose the Internet Options icon
a. Select the Connections tab
b. Select the LAN Settings box
c. In the “Automatic configuration” section, both “Automatically detect settings”
and “Use automatic configuration script” must NOT be checked.
d. In the “Proxy server” section, “Use a proxy server” must be checked in most
situations. If your network does not use a firewall, or if you experience
connection problems, uncheck this box.
e. If you checked “Use a proxy server for your LAN”:
f. Enter your normal network proxy server (usually can be found by opening
Internet Explorer and selecting Tools…Internet Options…Connections…LAN
Settings). You may also need to try web-proxy and port: 8088.
3. Select OK, then OK again to exit the Internet Options menu
Windows 2000 and Static Address
1. Turn on your PC
2. Log in to your Network with your normal Password.
3. Log in to Windows if needed.
4. Wait until the initial Windows “wallpaper” and icons appear.
5. Turn off any running applications.
Set up Network
This procedure assumes you are using a standalone PC (not connected to a network) using
the Microsoft Windows 2000 operating system. Other PC configurations may use slightly
different setups.
1. Go to the Control Panel
2. Choose the Internet Options icon
a. Select the Connections tab
b. Select the LAN Settings box
c. In the “Automatic configuration” section, both “Automatically detect settings”
and “Use automatic configuration script” must NOT be checked.
d. If you checked “Use a proxy server”:
e. Enter your normal network proxy server (usually can be found by opening
Internet Explorer and selecting Tools…Internet Options…Connections…LAN
Settings). You may also need to try web-proxy and port: 8088.
3. Select OK, then OK again to exit the Internet Options menu