Filter
Top Products
6
Install the new interface module by reversing this procedure.
7
Test the performance of the interface board.
Refer to "Verifying the interface module performance" in this chapter for the
performance verification test procedure.
8
Reconnect the HP 16505A or HP 16501A to the interface board, or
reconnect the interface board to your network.
If you are reconnecting to a network, refer to the
LAN Administartor’s and
Service Guide
, or check with your system administrator for reconnecting
instructions.
The Ether Address of the replacement interface module will be different than
the other module. At powerup, the HP 16500B operating system reads the
address of the interface module, then records the address in memory.
If your network configuration did not change, the addresses and information
in the configuration menus will remain the same.
Servicing the Interface Module
Removing and Replacing the HP 16500H Interface Module
3-12