AIPTEK V50 Projector User Manual


 
User’s Manual
www.aiptek.eu Page 11
EN
General Settings
On the main menu screen, select the Setting item and press the OK button. You will see
the Setting screen as below.
Language: This item allows users to select the displayed system language.
Keypad Sensitivity: This item allows users to set the key sensitivity (available setting
value is 1~5). The higher value indicates higher sensitivity.
Auto Off: This item allows users to enable or disable the auto power off function of the
system. If auto power off is off, the projector will be continuously on. It’s not
recommend to use this setting in battery mode.
Default: The item allows users to restore to the factory default settings.
Lumens: This item allows users to change the lumens mode by selecting as Eco
Mode or Enhanced Mode. In Eco mode the lumens in lower but also the power
consumption decrease (suggest for battery mode)
Volume Control: This item allows users to select audio output device as for Earphone
or for Speaker.
Information: This item displays the system information, including the
firmware/hardware version and available space of internal memory/SD card. It’s also
possible to performance a firmware update from here. For latest firmware please visit
Aiptek website and follow the instructions in the update SOP provide with the firmware
file.
To configure the setting:
1. Select the item and press the OK button to display the available setting options of the
item.
2. Select the desired option and press the OK button. The setting will be saved
automatically.
3. To discard the setting, simply press the Return (
) button. You will return to the
previous screen without changing the setting.