AIPTEK V50 Projector User Manual


 
User’s Manual
www.aiptek.eu Page 18
EN
5. After rebooting, Pico Projector is installed in your Notebook/PC successfully.
Start the Projection
After installation, you will find Pico Projector icon on your desktop. Click on the icon to start
the projection. Then the control icon of Pico Projector will appear in the function bar next
to the clock.
The Control Panels shows three functions:
1. Full Screen: The projected image has same resolution like your PC. The
picture is displayed 1:1 and shrinked to the native resolution of
the Pico Projector automatically. Use this mode on powerful PC’s
if you need the full resolution.
2. Compatible Mode: In compatible mode the resolution of your PC is reduced to
800x600 pixel and projects with the pico projector. The
advantage is a maybe better picture quality and better
performance of your system.
3. Exit: This mode will turn off the projector and close the driver.
Please remember that every time you want to use the projector please follow the
steps like below:
1. Use USB cable to connect the projector with your Notebook/PC.
2. Open the Pico Projector application by clicking the icon on desktop.
3. Choose the best mode for your projection.
Using a Netbook with Atom CPU or other single core processor may influence the
performance of your system. Some ideas might help to make the projection more
smoothly.
1. To adjust the resolution of video under 640x480.
2. Select “Compatible Mode” to project.
3. Use the following license free media player for video playback from
http://kmplayer.en.softonic.com
In order to save power, unplug the USB cable from Notebook/PC when you finished your
presentation.