Filter
Top Products
23
Here are descriptions of every setup item:
Band Please select the wireless band you wish to use. By selecting different
band setting, you’ll be able to allow or deny the wireless client of a
certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless
clients using the wireless band you select (802.11b, 802.11 Draft-N, or
802.11g) will be able to connect to this access point.
If you select 2.4GHz (B+G), then only wireless clients using 802.11b
and 802.11g band will be able to connect to this access point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to
connect to this access point, select 2.4GHz (B+G+N).
Main ESSID Please input the ESSID (the name used to identify this wireless
access point) here. You can input up to 32 alphanumerical characters.
PLEASE NOTE THAT ESSID IS CASE SENSITIVE.
Site Survey When you use this access point as a wireless station for Ethernet
network device to have wireless capability, you have to associate it
with a working access point. Click ‘Select Site Survey’ button, then a
“Wireless Site Survey Table” will pop up. It will list all available access
points near by. You can select one access point in the table and it will
join wireless LAN through this access point. Please go to Section
2.4.2.1 for more information about the ‘Wireless Site Survey Table’.
After you finish with setting, please click ‘Apply’, and the following message will be displayed:
After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous setup page to continue on other setup