Filter
Top Products
45
Wi-Fi Protected
Setup Information
All information related to WPS will be displayed here, they’re helpful
when you’re setting up connections by WPS.
WPS Status: Displays WPS status. If data encryption settings of this
access point has never been set, ‘unConfigured’ message will be
displayed her. (see Section 2-7 for detailed information); if data
encryption settings has been set before, ‘Configured’ message will be
displayed here.
Self PinCode: This is the WPS PIN code of this access point. This
code is useful when you need to build wireless connection by WPS
with other WPS-enabled wireless devices.
SSID: Displays the SSID (ESSID) of this access point.
Authentication Mode: The wireless security authentication mode of
this access point will be displayed here. If you don’t enable security
function of the access point before WPS is activated, the access point
will auto set the security to WPA (AES) and generate a set of
passphrase key
for WPS connection.
Passphrase Key: Displays the WPA passphrase here, all characters
will be replaced by asterisk for security reason. If encryption is not set
on this access point, nothing will be displayed here.
Config Mode There are ‘Registrar’ and ‘Enrollee’ modes for the WPS connection.
When ‘Registrar’ is enabled, the wireless clients will follow the access
point’s wireless settings for WPS connection. When ‘Enrolle’ mode is
enabled, the access point will follow the wireless settings of wireless
client for WPS connection.
Start PBC Click ‘Start PBC’ to start Push-Button style WPS setup procedure.
This access point will wait for WPS requests from wireless clients for 2
minutes. The ‘WLAN’ LED on the access point will be steady on for 2
minutes when this access point is waiting for incoming WPS request.
Start PIN Please input the PIN code of the wireless client you via client wish to
connect, and click ‘Start PIN’ button. The ‘WLAN’ LED on the access
point will be steady on when this access point is waiting for incoming
WPS request.
NOTE:Whenyou’reusingPBCtypeWPSsetup,youmustpress‘PBC’button
(hardwareorsoftware)ofwirelessclientwithin120seconds;ifyoudidn’t
pressPBCbuttonofwirelessclientwithinthistimeperiod,pleasepress‘PBC’
button(hardwareorsoftware)ofthisaccesspointagain.