Filter
Top Products
39
Here are descriptions of every setup item:
Use internal
MD5/PEAP RADIUS
Server
Uses built-in RADIUS Server (refer to next Section) instead
of external RADIUS server. If you check this box, the value
of internal RADIUS server fields will be ignored.
Enable 802.1x
Authentication
Enable or disable the use of 802.1x user authentication.
RADIUS Server IP
address
Please input the IP address of RADIUS authentication
server here.
RADIUS Server Port Please input the port number of RADIUS authentication
server here. Default value is 1812.
RADIUS Server
Password
Please input the password of RADIUS authentication
server here.
After you finish with setting, please click ‘Apply’, and the following message will be displayed:
After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous setup page to continue on other setup procedures,
or click “Apply” to reboot the router so the settings will take effect (Please wait for 30 seconds
while router is rebooting).