Filter
Top Products
9 System Commands
129 / 138
3EC 16982 AGAA TCZZA Ed. 01
system setpassword
Set/change the current SpeedToucht350i system password.
Because rebooting implies a flush of all nonĆsaved configurations it is highly recommended to save
the current configuration via the system save command.
To avoid unrestricted and unauthorized access to the SpeedToucht350i it is highly recommended
always to make sure that it is protected by a SpeedToucht350i system password and to change it
regularly.
SYNTAX:
system setpassword password = {<string>|$_BOARD_SERIAL_NBR}
password the system password can be set to either:
G <string>
A free to choose password <string>
G $_BOARD_SERIAL_NBR
Equal to the SpeedToucht350i device serial number's nine
numerical digits.
REQUIRED
IMPORTANT NOTE:
Serial number The code serial number is printed on the marking label found on
the bottom of the SpeedToucht350i:
MODEL NUMBER:
Q A
CPYYWWNNNNN
AA01
3EC 18704BC
Speed Touch Home POTS Network Terminator
MODEL NUMBER:
Q A
CP992300XXX
AA013EC 18204BC
US
C
R
LISTED
I . T . E . E168438
PART OF A SYSTEM THAT IS COVERED IN WHOLE OR IN
5,951,660.6,044,151.6,072,810.6,088,386.6,105,084
PART BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
5,636,253.5,633,817.5,657,355.5,903,612.5,867,528
FCC rules Part 15 and Part 68
FOR HOME OR OFFICE USE
FC
C
FCC ID: 6VUBEL–35680–DL–N
REN:<0.1
Made in: Country
Speed Touch Home NT Tested to Comply with
It consists of the concatenation of the string 'CP' followed by nine
digits. These nine digits incorporate the serial number.
In case the System password is set to the serial number, for
authentication the serial number must be given without the
preceding string 'CP' .
DO NOT REMOVE OR COVER THIS MARKING LABEL !!!