Filter
Top Products
1 Bridge Commands
29 / 138
3EC 16982 AGAA TCZZA Ed. 01
bridge portconfig
Configure a bridge interface.
SYNTAX:
bridge portconfig port = <name>
[state = <{disabled|learning|forwarding}>]
port The name of the bridge interface to configure. REQUIRED
[state] The bridge portstate for this interface. Choose between:
G disabled
G learning
G forwarding
OPTIONAL
EXAMPLE:
=>bridge portlist
0 OBC state: forwarding
RX bytes: 75783 frames: 572
TX bytes: 82768372 frames: 341221 dropframes: 0
1 eth0 state: forwarding
RX bytes: 156344216 frames: 5899238
TX bytes: 75689 frames: 425 dropframes: 5558017
2 Br1 state: forwarding
vpi: 8 vci: 35 protocol: vc-muc
fcs: on compression: off
RX bytes: 0 frames: 0
TX bytes: 0 frames: 0 dropframes: 0
=>bridge portconfig port=Br1 state=learning
=>bridge portlist
0 OBC state: forwarding
RX bytes: 75783 frames: 572
TX bytes: 82768372 frames: 341221 dropframes: 0
1 eth0 state: forwarding
RX bytes: 156344216 frames: 5899238
TX bytes: 75689 frames: 425 dropframes: 5558017
2 Br1 state: learning
vpi: 8 vci: 35 protocol: vc-muc
fcs: on compression: off
RX bytes: 0 frames: 0
TX bytes: 0 frames: 0 dropframes: 0
=>
RELATED COMMANDS:
bridge portadd
Create a bridge interface.
bridge portdelete
Delete a bridge interface.
bridge portlist
Show current bridge configuration.