Filter
Top Products
9 / 138
3EC 16982 AGAA TCZZA Ed. 01
Accessing the Command Line Interface
EndĆusers can access the Command Line Interface via a Telnet session. However, this requires that
TCP/IP connectivity exists between the host from which the Telnet session is opened and the
SpeedToucht350i.
Access via a Telnet Session
As soon a session to the CLI is opened, the SpeedToucht350i banner pops up, followed by the
CLI prompt.
In case the SpeedToucht350i is protected by a System password authentication will be required
before access is granted.
The following figure shows an example of the SpeedToucht350i banner after opening a Telnet
session and authentication.
EXAMPLE:
/home/doejohn{1}$ telnet 10.0.0.138
Trying 10.0.0.138...
Connected to 10.0.0.138.
Escape character is ’^]’.
User :
SpeedTouch (00–90–D0–00–01–23–45)
Password : ######
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
*
* ______
* ___/_____/\
* / /\\ Alcatel Speed Touch(TM)350i
* _____/__ / \\ ADSL Modem for ISDN
* _/ /\_____/___ \ Version R3.2
* // / \ /\ \
* _______//_______/ \ / _\/____ Copyright (c) 1999–2001 Alcatel
* / / \ \ / / / /\
* __/ / \ \ / / / / _\__
* / / / \_______\/ / / / / /\
* /_/______/___________________/ /________/ /___/ \
* \ \ \ ___________ \ \ \ \ \ /
* \_\ \ / /\ \ \ \ \___\/
* \ \/ / \ \ \ \ /
* \_____/ / \ \ \________\/
* /__________/ \ \ /
* \ _____ \ /_____\/
* \ / /\ \ /___\/
* /____/ \ \ /
* \ \ /___\/
* \____\/
*
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
=>