Aleratec 360105 Printer User Manual


  Open as PDF
of 38
 
www.aleratec.com
23
Troubleshooting
7. Disctrayhingegetsstuckinthe“open”position.
1. Abort any ongoing processes.
2. Stop the RoboJet Disc Autoloader application by clicking the
“Stop Autoloader” button
3. Click the “Tray Up” button on the RoboJet Disc Autoloader screen
8. Disctraygetsmisaligned(notbeingpulledintothediscautoloader
correctly).
1. Abort any ongoing processes
2. Stop the RoboJet Disc Autoloader application by clicking the
“Stop Autoloader” button
3. Slide the Printer Mode Switch to the “paper” position
4. Remove the disc autoloader from the printer
5. Click the “Tray In” button on the RoboJet Disc Autoloader screen
6. Push the disc tray back into the unit and make sure the “B”
and “C” arrows are aligned
7. Make sure the disc autoloader is positioned correctly (see page 3).
c
B
c
B
S
 previous next