Aleratec 360105 Printer User Manual


  Open as PDF
of 38
 
www.aleratec.com
24
Troubleshooting
7. Click the “Tray Out” button so that the tray is pulled into the
disc autoloader
8. Reattach the disc autoloader to the printer and slide the Printer
Mode Switch back to the “disc” position
9. Thediscbinisgettingtoofullforoperationpriorto100discs.
▪ Optical discs vary in thickness depending on the type,
manufacturing and coatings. Thicker discs will take up more space
in the disc bin and reduce the total capacity of the disc autoloader.
The unit has been designed so that you can remove completed discs
while a job is in progress, allowing you to increase a job’s capacity.
10. Discsarefrequentlygettingstuckwhenbeingloadedfromthe
dispenserordroppingintothediscbin.
▪ Some types of discs are also “stickier” than others, especially when
taken from a brand new spindle. It often helps to “fan” these discs
prior to loading them into the disc autoloader (briey separate each
individual disc from the one above and below it on the spindle).
c
S
c
S
 previous next