Allied Telesis 86251-08 Switch User Manual


 
50 Patch Release Note
Patch 86251-08 for Software Release 2.5.1
C613-10356-00 REV I
this value. If it should never be used as a default router, set it to
NOTDEFAULT.
ADD IP INTERFACE=interface IPADDRESS={ipadd|DHCP}
PREFERENCELEVEL={-2147483648..2147483647|NOTDEFAULT}
[other-ip-parameters]
SET IP INTERFACE=interface
[PREFERENCELEVEL={-2147483648..2147483647|NOTDEFAULT}]
[other-ip-parameters]
4. Enable advertising.
Enable router advertisements on all configured advertising interfaces,
using the command:
ENABLE IP ADVERTISE
5. Check advertise settings.
To check the router advertisement settings, use the command:
SHOW IP ADVERTISE
Commands These commands have been modified:
ADD IP INTERFACE
SET IP INTERFACE
These commands are new:
ENABLE IP ADVERTISE
ADD IP ADVERTISE
SET IP ADVERTISE
SHOW IP ADVERTISE
Two new parameters have been added to the ADD IP INTERFACE and SET IP
INTERFACE commands:
ADD IP INTERFACE=interface IPADDRESS={ipadd|DHCP}
[ADVERTISE={YES|NO}]
[PREFERENCELEVEL={-2147483648..2147483647|NOTDEFAULT}]
[other-ip-parameters]
SET IP INTERFACE=interface [ADVERTISE={YES|NO}]
[PREFERENCELEVEL={-2147483648..2147483647|NOTDEFAULT}]
[other-ip-parameters]
where:
interface is an interface name formed by concatenating a Layer 2 interface
type, an interface instance, and optionally a hyphen followed by a logical
interface number in the range 0 to 15. If a logical interface is not specified, 0
is assumed.
The ADVERTISE parameter specifies whether or not the logical interface is to
send Router Discovery advertisements. The default is YES.
The PREFERENCELEVEL parameter specifies the preference of the address as
a default router address relative to other router addresses on the same subnet,
as a decimal integer. If the minimum value -2147483648 or the keyword
NOTDEFAULT is specified, the address is not to be used by neighbouring
hosts as a default address, even though it may be advertised. The default value
is the mid range 0.