Filter
Top Products
Patch 86251-08 For Rapier Series Switches SHOW IP ADVERTISE 61
Patch 86251-08 for Software Release 2.5.1
C613-10356-00 REV I
Commands
This enhancement introduces three new commands:
■ DISABLE IP ICMPREPLY
■ ENABLE IP ICMPREPLY
■ SHOW IP ICMPREPLY
DISABLE IP ICMPREPLY
Syntax DISABLE IP
ICMPREPLY[={ALL|NETUNREACH|HOSTUNREACH|REDIRECT}]
Description This command disables ICMP reply messages.
If ALL is specified, all configurable ICMP message replies are disabled. If
NETUNREACH is specified, all network unreachable message replies are
disabled (RFC792 Type 3 Code 0). If HOSTUNREACH is specified, all host
unreachable message replies are disabled (RFC792 Type 3 Code 1). If
REDIRECT is specified, all ICMP redirect message replies are disabled (RFC792
Type 5 Code 0, 1, 2, 3).
Example To disable all configurable ICMP messages, use the command:
DISABLE IP ICMPREPLY=ALL
See Also ENABLE IP ICMPREPLY
DISABLE IP ECHOREPLY
SHOW IP ICMPREPLY
ENABLE IP ICMPREPLY
Syntax ENABLE IP
ICMPREPLY[={ALL|NETUNREACH|HOSTUNREACH|REDIRECT}]
Description This command enables ICMP reply messages.
If ALL is specified, all configurable ICMP message replies are enabled. If
NETUNREACH is specified, all network unreachable message replies are
enabled (RFC792 Type 3 Code 0). If HOSTUNREACH is specified, all host
unreachable message replies are enabled (RFC792 Type 3 Code 1). If
REDIRECT is specified, all ICMP redirect message replies are enabled (RFC792
Type 5 Code 0, 1, 2, 3).
Example To enable all configurable ICMP messages, use the command:
ENABLE IP ICMPREPLY=ALL
See Also ENABLE IP ECHOREPLY
DISABLE IP ICMPREPLY
SHOW IP ICMPREPLY