Filter
Top Products
Chapter 5: Setting Advanced Properties
70
Wake Up Capabilities
The Wake Up Capabilities property enables the network adapter to wake
up from a low-power mode when it receives a network wake-up frame.
There are two types of wake-up frames: Magic Packet and Wake Up
Frame. The default setting is Both - which implements both the Magic
Packet and Wake Up Frame.
The Wake on LAN (WOL) feature applies to the copper port NIC cards:
AT-2912T
AT-2972T/4
WOL is not supported on fiber NIC cards due to power limitations of the
PCI bus. The Gigabit fiber cards in this category are:
AT-2916SX
AT-2916LX10/LC
AT-2931SX,AT-2972SX
AT-2972LX10/LC
To change the Wake Up Capabilities property, do the following:
1. For Windows Server 2003 and Windows XP systems, access the
System Properties Dialog Box. See “Modifying Configuration
Properties” on page 39.
For Windows 2008 R2, Windows 7, and Windows Vista systems,
access the Device Manger for your operating system:
To access the Device Manager window in Windows 2008 R2 or
Windows 7, see “Selecting the Device Manager in Windows 2008
R2 and Windows 7” on page 44.
To access the Windows Vista Device Manager, see “Selecting the
Device Manager in Windows Vista” on page 45.
2. Click the Advanced tab.
The Advanced tab is shown in Figure 21 on page 56.
3. From the Property list on the Advanced tab, select Wake Up
Capabilities.