Filter
Top Products
AT-S94 Version 3.0.0.45 Software Release Notes
PN 613-001777 Rev A 2 Allied Telesis, Inc.
AT-8000S/48 – 48 FE ports with modular configuration 2 x combo 10/100/1000 SFP ports
and 2 RJ-45 10/100/1000 stacking ports.
AT-8000S/48POE – 48 FE ports with modular configuration 2 x combo 10/100/1000 SFP
ports and
2 RJ-45 10/100/1000 stacking ports, with support for Power over Ethernet on up to 36 ports.
The AT-8000S/24, AT-8000S/24POE, AT-8000S/48 and AT-8000S/48POE can be combined
together in a six-unit high stack.
Product Documentation
For descriptions how to install the devices as standalone units or as members of a stack, refer to
the following guide:
AT-8000S Installation Guide
For lists of CLI commands available to the user to configure the devices, refer to the following
guide:
AT-8000S CLI Reference Guide
See “Where to Find Product Information and Management Software Updates” on page 6 for
instructions for accessing these documents.
What’s New in Version 3.0.0.45
New Software Features
None
Resolved Issues
Fatal error reporting task LPCL, when users perform 802.1x authentication (CQ 134428
ATI293)
Guest VLAN timeout doesn’t work even if port is changing its state from up/down (CQ134167
ATI295)
DNS behavior is inconsistent (CQ129822 ATI285)
Daylight Saving Time setting does not function properly in the southern hemisphere (CQ
138179 ATI 308)
Adding the ability to change IP address remotely in one step. (CQ 141261 ATI 313)
Operational Notes
100 Mbps SFP: Switch over back to fiber fails after fiber link restored. It happens when an
LCP155A4HSR 100M SFP is used when backup Copper link is 1G.
Recommended User Work Around: Works fine when fiber and Copper speeds are similar
and there are no issues with different SFP model.
Port Mirroring: Port mirroring closes the port and opens it again.
Recommended User Work Around: Not required.
TAB functionality: Use of the Tab key does not complete the command Interface range
VLAN all and the command Switchport general allowed VLAN.
Recommended User Work Around: Type in the full command.