Filter
Top Products
AT-S94 Version 3.0.0.45 Software Release Notes
PN 613-001777 Rev A 6 Allied Telesis, Inc.
2. Power cycle the switch.
3. Quickly press the Enter key when the switch displays the following line:
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
4. If you hit the Enter key quickly enough, the following Menu is displayed:
Startup Menu
[1] Download Software
[2] Erase Flash File
[3] Enter Diagnostic Mode
[4] Set Terminal Baud-Rate
[5] Back
Enter your choice or press 'ESC' to exit:
5. Select number one by pressing the ‘1’ key.
The switch will respond with the following message:
Begin the transmission of a previous version.
Downloading code using XMODEM.
You may proceed with the xmodem transfer.
6. When the download is complete, reboot the switch.
7. Install the latest boot loader (s94bv10107.rfb) using the copy command. You may use the
xmodem or TFTP options as described in the AT-8000S CLI Reference Guide.
8. Install the Version 3.0.0.45 software by the following steps 6 - 8 in “Upgrade Procedure from
Version 1.0.0.25” on page 12.
Where to Find Product Information and Management Software Updates
Both the product documentation and the management software updates for all Allied Telesis
products are available on our web site at http://www.alliedtelesis.com/support.
Once you access the web site, enter the hardware product model of your switch in the Search by
Product Name field, for example, enter “AT-8000S/24.” Then click Find. You can view the
documents online or download them onto your local workstation or server.
The software is available for download at http://www.alliedtelesis.com/ support/software/
restricted/. You must have an account to access this site. If you do not have an account, then
click on the “create an account” link.
History of Resolved Issues
Version 3.0.0.44