Filter
Top Products
AT-MC601, AT-MC602 Installation and User’s Guide
40
The Configuration Saved pop-up shown in Figure 27 will appear when the
set rate or the highest possible rate has been achieved.
Figure 27 Configuration Saved
An unsuccessful configuration attempt may include the following status
reports:
Loading defaults
Can’t read link status
Done
These negative status reports may also be accompanied by error message
pop-ups. Error messages are explained in ”Troubleshooting” on page 47.
HIGH -> LOW/LOW -> HIGH
Allows you to choose the negotiation direction for the modem speed. The
default and preferred direction is Low -> High. Choosing a negotiation
direction determines how the modem searches for speeds. When set to Low
-> High, the modem will start at minimum speeds and keeps negotiating
progressively higher speeds until it has achieved its maximum speed for
the connection.
Apply
Press the Apply button to set your data transfer rates and negotiation
direction selections.
About
Use the About button to display the version number of the AT-S57
configuration software.