Filter
Top Products
Chapter 2: Installation
72
Installing the AT-SBx31GP24 PoE Line Card
Perform the following procedure to install the AT-SBx31GP24 PoE Line
Card
:
Caution
The AT-SBx31GP24 PoE Line Card contains active electronic
devices, which can be damaged by electro-static discharges (ESD).
Follow the procedure given in “Protection Against Electrostatic
Discharge (ESD)” on page 60 to guard against ESD damage when
unpacking and installing this line card.
1. Choose a slot in the chassis for the AT-SBx31GP24 PoE Line Card. It
can be installed in slots 0 to 3 or 6 to11.
Note
Chassis slots 4 and 5 are reserved for the AT-SBx31CFC Fabric
Control Card.
2. Remove the line card from the shipping package. If it is missing or
damaged, contact your Allied Telesis sales representative for
assistance.
Note
Store the packaging material in a safe location. You may use the
original shipping material if you need to return the unit to Allied
Telesis.