Filter
Top Products
SwitchBlade x3112 Installation Guide
73
3. Align the line card with the internal chassis card guides in the selected
slot of the AT-SBx3112 Chassis. Figure 46 shows the line card aligned
with slot 0.
Figure 46. Aligning the AT-SBx31GP24 PoE Line Card in the Chassis Slot
4. Insert the line card into the slot as displayed in Figure 47 on page 74
until the faceplate is firmly seated against the chassis front panel.
Caution
Forcing the line card into its chassis slot when it is not properly
aligned with the card guides may damage the backplane connector
pins inside the chassis. If there is undue resistance, remove the line
card. Check to be sure that it is properly aligned with the card guides
when sliding it into the chassis.
E
P
O
E
0
2
4
6
8
1799
SBx31GP24
357911
24681012 14 16 18 20
22
13 15 17 19 21
23
0
1
plus