Filter
Top Products
Chapter 2: Installation
84
Applying A/C Power to the SwitchBlade x3112
If you have not already installed the power supply(s), go to the “Installing
the AT-SBx3161 System Power Supply” on page 61 and “Installing the
AT-SBx3165 PoE Power Supply” on page 65.
1. Locate the AC sockets on the back of the AT-SBx3112 Chassis as
displayed in
Figure 56. The sockets are labeled A to D. They
correspond to the power supply slots on the front panel.
Figure 56. AC Sockets on the AT-SBx3112 Chassis Rear Panel
2. Locate the AC power cord shipped with the power supply(s).
3. Connect the AC power cord to the appropriate AC socket on the
chassis rear panel.
P
O
E
AC INPUT 100-240VAC~
A
POE PSU
B
POE PSU
C
SYSTEM PSU
D
SYSTEM PSU
POWER SUPPLY INTERFACE
A and C PSU
B and D PSU
1783
A
D
C
B