Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.42 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
bgp scan-time (BGP)
Use this command to set the interval for BGP route next-hop scanning.
Use the no variant of this command to disable this function.
Syntax bgp scan-time <time>
no bgp scan-time [<time>]
Default The default scanning interval is 60 seconds.
Mode Router Configuration
Usage Use this command to configure scanning intervals of BGP routers. This interval is the
period after which router checks the validity of the routes in its database.
To disable BGP scanning, set the scan time interval to 0 seconds.
Example
Parameter Description
<time> <0-60> Scanning interval in seconds.
awplus#
configure terminal
awplus(config)#
router bgp 100
awplus(config-router)#
bgp scan-time 10