Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.220 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
show ip bgp (BGP)
Use this command to display BGP network information.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
Syntax show ip bgp [<ip-addr>|<ip-addr/m>]
Mode User Exec and Privileged Exec
Example
Output
Figure 3-8: Example output from the show ip bgp command
Related Commands neighbor remove-private-AS (BGP)
Parameter Description
<ip-addr>
<ip-addr/m>
Specifies the IPv4 address and the optional prefix mask length.
awplus#
show ip bgp 10.10.1.34/24
BGP table version is 7, local router ID is 80.80.80.80
Status codes: s suppressed, d damped, h history, * valid, >
best, i - internal, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight
Path
S>i10.70.0.0/24 192.10.23.67 0 100 0 ?
S>i30.30.30.30/32 192.10.23.67 0 100 0 ?
S>i63.63.63.1/32 192.10.23.67 0 100 0 ?
S>i67.67.67.67/32 192.10.23.67 0 100 0 ?
S>i172.22.10.0/24 192.10.23.67 0 100 0 ?
S>i192.10.21.0 192.10.23.67 0 100 0 ?
S>i192.10.23.0 192.10.23.67 0 100 0 ?
Total number of prefixes 7