Filter
Top Products
BGP and BGP4+ Commands
Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.206 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-2.6 C613-50032-01 REV D
show bgp ipv6 community (BGP4+)
Use this command to display routes that match specified communities within an IPv6
environment. Use the show ip bgp community (BGP) command within an IPv4
environment.
For information on output options, see “Controlling “show” Command Output” on
page 3.6.
You may use any combination and repetition of parameters listed in the <type>
placeholder.
Syntax show bgp ipv6 community [<type>] [exact-match]
Mode
User Exec and Privileged Exec
Examples Note that the AS numbers shown are examples only.
Related Commands show ip bgp community (BGP)
Parameter Description
<type> {[AA:NN][local-AS][no-advertise][no-export]}
AA:NN Specifies the Autonomous System (AS)
community number, in AA:NN format.
local-AS Do not send outside local Autonomous Systems
(well-known community).
no-advertise Do not advertise to any peer (well-known
community).
no-export Do not export to next AS (well-known
community).
exact-match Specifies that the exact match of the communities is displayed. This
optional parameter cannot be repeated.
awplus#
show bgp ipv6 community 64497:64499 exact-match
awplus#
show bgp ipv6 community 64497:64499 64500:64501
exact-match
awplus#
show bgp ipv6 community 64497:64499 64500:64501
no-advertise 64510:64511
awplus#
show bgp ipv6 community no-advertise no-advertise
no-advertise exact-match
awplus#
show bgp ipv6 community no-export 64510:64511
no-advertise local-AS no-export
awplus#
show bgp ipv6 community no-export 64510:64511
no-advertise 64497:64499 64500:64501 no-export
awplus#
show bgp ipv6 community no-export 64497:64499
no-advertise local-AS no-export