Filter
Top Products
Chapter 2: Installation
46
1. Remove the dust plug from the SFP, as shown in Figure 14.
Figure 14. Removing the Dust Plug from the SFP
2. Connect the fiber optic cable to the SFP port, as shown in Figure 15.
Figure 15. Connecting the Fiber Optic Cable
Powering On the
Switch
To power on the switch, perform the following procedure:
1. Plug the power cord into the AC power connector on the back of the
switch, as shown in Figure 16.
25
CLASS 1
LASER
PR
OD
UCT
SFP
10/100/1000Base-T
26
SFP
10/100/1000Base-T
UPLINK PORTS
1102
25
CLASS 1
LASER PRODUCT
SFP
10/100/1000Base-T
26
SFP
10/100/1000Base-T
UPLINK PORTS
1103