Filter
Top Products
Page 17 | AlliedWare™ OS How To Note: VPNs with NetScreen routers
Click the OK button. If you changed the management IP address in step 3, this stops your
browser from accessing the GUI. Change the IP address on your PC if necessary, and browse
to the new management address.
You have now finished configuring ethernet
1
. The next steps configure ethernet3, which is
the public WAN interface.
If necessary, browse to Network, then Interfaces again. On the ethernet
3
row, click Edit.
Check that the Zone Name is set to Untrust, and specify the appropriate IP address. In this
example, the address is a Static IP of 200.200.200.
1
and a mask of 30.
Click the Apply button. The page refreshes with more settings available.
5. Set the IP address for ethernet3