Filter
Top Products
Page 28 | AlliedWare™ OS How To Note: VPNs with NetScreen routers
The router commands
This section lists the configuration commands that result from the GUI on each router. You
can compare your router configuration against these commands to help with
troubleshooting.
Allied Telesis router
To display the router configuration, log into its CLI and enter the following command:
show config dynamic
Static
address on
Allied Telesis
router
The configuration is:
# System configuration
set system name="AlliedTelesis"
# User configuration
set user=manager pass=your-password priv=manager lo=yes
set user=manager telnet=yes desc="Manager Account"
add user=secoff pass=your-password priv=securityOfficer lo=yes
set user=secoff telnet=no netmask=255.255.255.255
# IP configuration
enable ip
ena ip dnsrelay
add ip int=vlan1 ip=192.168.1.1
add ip int=eth0 ip=100.100.100.1 mask=255.255.255.252
add ip rou=0.0.0.0 mask=0.0.0.0 int=eth0 next=100.100.100.2
add ip dns prim=150.150.150.1 seco=150.150.150.2
# Firewall configuration
enable firewall
create firewall policy="guilan"
enable firewall policy="guilan" icmp_f=ping
add firewall policy="guilan" int=vlan1 type=private
add firewall policy="guilan" int=eth0 type=public
add firewall poli="guilan" nat=enhanced int=vlan1 gblin=eth0
add firewall poli="guilan" ru=1 ac=allo int=eth0 prot=udp po=500
ip=100.100.100.1 gblip=100.100.100.1 gblp=500
add firewall poli="guilan" ru=2 ac=allo int=eth0 prot=udp po=4500
ip=100.100.100.1 gblip=100.100.100.1 gblp=4500
add firewall poli="guilan" ru=3 ac=non int=eth0 prot=ALL enc=ips
add firewall poli="guilan" ru=4 ac=non int=vlan1 prot=ALL
ip=192.168.1.1-192.168.1.254
set firewall poli="guilan" ru=4 rem=192.168.2.1-192.168.2.254
# DHCP (Post IP) configuration
enable dhcp
create dhcp poli="lan-dhcp" lease=259200
add dhcp poli="lan-dhcp" subn=255.255.255.0
add dhcp poli="lan-dhcp" rou=192.168.1.1
add dhcp poli="lan-dhcp" dnss=192.168.1.1
create dhcp ran="standard" poli="lan-dhcp" ip=192.168.1.100 num=50