Filter
Top Products
Page 18 | AlliedWare™ OS How To Note: VPNs with NetScreen routers
Check that the Interface Mode is set to Route.
Click the OK button. You have now finished configuring ethernet3.
Configure routing
By default, the NetScreen router blocks all LAN traffic from accessing the WAN. The
following steps change this, and also configure a default route.
From the left-hand menu on the Home page, select Wizards, then Outgoing Policy. The GUI
displays the first page of the wizard. Select “Permit unrestricted access to the untrusted
zone”.
Click the Next button.
6. Set the interface mode for ethernet3
1. Start the Outgoing Policy Wizard