Allied Telesis X510 Switch User Manual


 
2 Software Release Note AlliedWare Plus Version 5.4.3-0.1 C613-10508-01-REV B
Introduction
This release note describes the new features and enhancements in AlliedWare Plus
software version 5.4.3-0.1 since version 5.4.2-0.1. For more information, see the Software
Reference for your switch. Software file details for this version are listed in Tab le 1 below.
Caution: Using a software version file for the wrong switch model may cause
unpredictable results, including disruption to the network. Information in this release note
is subject to change without notice and does not represent a commitment on the part of
Allied Telesis, Inc. While every effort has been made to ensure that the information
contained within this document and the features and changes described are accurate,
Allied Telesis, Inc. can not accept any type of liability for errors in, or omissions arising
from, the use of this information.
Table 1: Switch models and software file names
Models Series Software File
GUI File
Date
x510-28GTX
x510-52GTX
x510 x510-5.4.3-0.1.rel x510-gui_543_10.jar 03/2013
x610-24Ts
x610-24Ts-PoE+
x610-24Ts/X
x610-24Ts/X-PoE+
x610-24SPs/X
x610-48Ts
x610-48Ts-PoE+
x610-48Ts/X
x610-48Ts/X-PoE+
x610 x610-5.4.3-0.1.rel x610-gui_543_09.jar 03/2013
x900-12XT/S
x900-24XS
x900-24XT
x900 x900-5.4.3-0.1.rel x900-gui_543_09.jar 03/2013
SwitchBlade x908 SBx908 SBx908-5.4.3-0.1.rel x900-gui_543_09.jar 03/2013
SwitchBlade x8112 SBx8112 SBx81CFC400-5.4.3-0.1.rel SBx81CFC400_gui_543_07.jar 03/2013