Filter
Top Products
SWITCHERS
400-0099-003 2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
MX2456RM Switcher. Keep this manual handy for
future reference. These safety instructions are to
ensure the long life of your MX2456RM and to
prevent fire and shock hazards. Please read them
carefully and heed all warnings.
1.1 GENERAL
• Unauthorized personnel shall not open the unit
since there are high-voltage components inside.
• Qualified ALTINEX service personnel or its
authorized representatives must perform all
service.
1.2 RACK-MOUNTING SAFETY GUIDELINES
• The maximum operating ambient temperature for
this unit is 35°C.
• Distribute units evenly inside the rack. Hazardous
conditions may be created by an uneven weight
distribution.
• Connect the unit to a properly rated supply circuit.
• Reliable grounding should be maintained.
1.3 INSTALLATION
• For best results, place the MX2456RM Switcher
on a flat, level surface in a dry area away from
dust and moisture.
• To prevent fire or shock, do not expose this unit
to water or moisture. Do not place the
MX2456RM in direct sunlight, near heaters, or
heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam can
harm internal components.
• Handle the MX2456RM Switcher carefully.
Dropping or jarring can damage internal
components.
• Do not place heavy objects on top of the
MX2456RM. If the MX2456RM is to be mounted
to a table or wall, use only ALTINEX-made
mounting accessories, such as the rack-mount
shelf DA1298RM or the rack-mount ears
DA1292FC and cables for optimum setup.
• To turn off the main power, be sure to remove the
cord from the power outlet. The power outlet
socket should be installed as near to the
equipment as possible, and should be easily
accessible.
• Do not pull the power cord or any cable that is
attached to the MX2456RM Switcher.
• If the MX2456RM Switcher is not used for an
extended period, disconnect the power cord from
the power outlet.
1.4 CLEANING
• Unplug the MX2456RM power cord before
cleaning. Clean surfaces with a dry cloth. Never
use strong detergents or solvents, such as
alcohol or thinner. Do not use a wet cloth or water
to clean the unit.
1.5 FCC NOTICE
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
• This equipment has been tested and found to
comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the user
will be required to correct the interference at his
own expense.
• Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.