Filter
Top Products
BreezeNET DS.11 Series User Manual
1-4
RB-DS.11 Wireless Bridge
The RB-DS.11 Wireless Bridge connects a remote Ethernet network to a central
network server or Internet site via a BU-DS.11 Multipoint Base Unit.
The maximum number of MAC addresses that the unit can handle at any specific
time is 1024 and the Aging algorithm is applied at all times.
When a station on the Ethernet LAN sends a message that is not destined for a
local station, the RB-DS.11 forwards the message to the BU-DS.11. When the
BU-DS.11 receives a message destined for a station on the RB-DS.11's LAN, the
BU-DS.11 forwards it to the RB-DS.11. In this manner, the RB-DS.11 and the
BU-DS.11 work together like a standard network bridge.
The first time each station on the RB-DS.11’s LAN sends a message, the station’s
address is registered by both the RB-DS.11 and the BU-DS.11. It is possible for the
RB-DS.11 and BU-DS.11 to store all the addresses necessary to support an entire
LAN connected to a RB-DS.11.
The RB-DS.11 comes in two options: The RB-DS.11 and the RB-DS.11D.
The RB-DS.11 is the basic unit, equipped with an antenna integrated into the front
cover of the outdoor unit.
The RB-DS.11D has no integral antenna and is equipped with an antenna
connector (on the outdoor unit) for the connection of an external antenna (not
included with the unit).
Refer to Antennas for Outdoor Applications on page 2-6 and Available Antennas on
page 2-7 for information on how to select an external antenna.
BreezeNET DS.11 Compatibility and Standards
BreezeNET DS.11 products are compatible with the following standards and are
interoperable with other IEEE 802.11b compatible, 2.4 GHz direct sequence
products.
♦ IEEE 802.11b Wireless LAN.
♦ IEEE 802.3 10BaseT Ethernet.
♦ DHCP for automatic IP address assignment.
♦ SNMP for system management.