Filter
Top Products
Configuring Units
48 3ware 9000 Series Serial ATA RAID Controller Installation Guide
3Tab to OK and press Enter.
After you start your system, you will see multiple volumes
available in the operating system: 2 TB each, plus one volume
with any remaining storage beyond the multiple of 2TB. (In this
release, 3BM does not show individual volumes.)
Leaving Individual Drives as JBODs
By default, if you leave individual drives unconfigured (JBODs),
they will not be available to the operating system. If you want to be
able to use individual drives, configure them as single-disk units.
If you have JBODs attached to an 8000 controller that you want to
use with the 9000 controller, see
“Moving Units from an 8000
Controller to a 9000 Controller” on page 23.